Tecfluid LU Series Bedienungsanleitung PDF herunterladen (Seite 16)

The remaining screens will require the parameters in the chosen mode.

5.5 Current output

Next, the loop current programming screens are displayed.

On the first screen the user can program the level (or distance) at which the instrument

will give 4 mA at its output (lower range). Next, the level (or distance) at which it will give

20 mA (upper range) is programmed.

The level "lower range" can be higher than the "upper range" or vice versa.

5.4 Default display mode

Display modes of distance and level explained in section 4.2 can be programmed as

modes by default. Thus, the instrument will always be working in this mode even if there is

a power fail.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Keine Kommentare

Tecfluid LU Series Bedienungsanleitung Seite 16